| A1333B
|
 |
|
|
| A1333A
|
 |
|
|
| A1333D
|
 |
|
|
| A1342
|
 |
| Low Friction Aluminum Bridge Adjusters |
| Aluminum bridge adjusters (pair). This precision part is machined from solid aluminum bar stock using numerical control technology to assure exact squareness of the wheel and shaft. The diameter is kept to 1 1/8" in order to minimize weight. Allows use of one bridge year- round with quick adjustment for solo, orchestra or jazz playing |
| Check for Availability |
|
|
|
|
|
|
|
|
|
|
| A1340
|
 |
| Low Friction Aluminum Bass Bridge Adjusters |
| Aluminum bridge adjusters (pair). This precision part is machined from solid aluminum bar stock using numerical control technology to assure exact squareness of the wheel and shaft. The diameter is kept to 1 1/8" in order to minimize weight. Allows use of one bridge year- round with quick adjustment for solo, orchestra or jazz playing |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1338
|
 |
|
|
| A1341
|
|
|
|
| A1342A
|
 |
| Bridge adjusters, ebony, 10mm threads |
| These adjusters are made with genuine first quality ebony threaded rod for superb sound transfer. The adjusting wheel is a light -weight synthetic. We revised the design to use a 10mm thread in the feet of the bridge. We like this because it is a little smaller than the 7/16 threads used on other models. As a result, these adjusters leave a little more maple in the bridge legs so that the fitting is not so tight. The unthreaded end fits into a letter Q hole. |
| Check for Availability |
|
|
|
|
|
|
|
|
|
|
| A1342B
|
 |
| Ebony Bridge Adjusters |
| These adjusters are made with genuine first quality ebony threaded rod for superb sound transfer. The adjusting wheel is a light -weight synthetic. These adjusters are a direct replacement for Robertson ebony and phenolic adjusters - the unthreaded end fits into a letter Q hole.100% compatible with Robertson/Stenholm ebony or phenolic adjusters |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1342C
|
|
| Ebony Bridge Adjusters |
| These adjusters are made with genuine first quality ebony threaded rod for superb sound transfer. The adjusting wheel is a light -weight synthetic. These adjusters are a direct replacement for Kolstein wooden adjusters - the unthreaded end fits into a 3/8" hole.
Please follow installation instructions for best results. You'll also need a 3/8" drill and a 7/16 - 14 tap |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1150
|
 |
|
|
| A1150A
|
|
|
|
| A1152
|
|
| ONYX Bass Wheel, 10 mm shank |
| Made in the USA Exclusively for Lemur Music by ONYX Musical Products. 10MM size works perfectly with Gotz Endpin. Please click thru to learn more. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1152A
|
|
|
|
| A1153
|
|
| ONYX Bass Wheel, 5/8 shank |
| 5/8" size is slightly larger than 1/2" and fits hollow tube endpins. Made in the USA for Lemur Music by ONYX Musical Products. Please click thru for more information... |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1153A
|
|
|
|
| A1157
|
|
| ONYX Bass Wheel, 12mm |
This size fits some of the popular chinese made endpins. We do not use this on Lemur Sunrise basses, however.
Made exclusively for Lemur Music by ONYX Musical Products in the USA. |
| In Stock |
|
|
|
|
|
|
|
|
|
|
| A1154
|
|
| ONYX Bass Wheel, 1/2 shank |
| So easy to use, just remove your endpin rod and insert the wheel! Away you roll... Please click thru to learn more |
| In Stock |
|
|
|
|
|
|
|
|
|
|
