|
The Onyx OM12 is a 12"
two-way speaker system designed specifically for upright bass.
Expertise in both loudspeakers
and bass has resulted in a speaker system like no other, tailored to deliver the
most natural bass sound to every listener.
What
Makes a Great Bass Cabinet? The design team at Onyx Musical Products
discovered that few, if any, speaker cabinets for bass provide the sound that
performers need.
Here's
what we found to be important:
How ONYX Delivers
Let's
begin with the fundamental frequencies that support the notes you play.
The OM12 follows in the footsteps of the most respected speakers used in studio
monitors and home stereo. The 12" driver is mounted into a carefully designed
vented enclosure which extends and flattens response down to the lowest notes
you play.
You'll be surprised how
fat the low end sounds when the frequency response is flat.
We're not talking about the mid-bass frequencies so often over-emphasized in
other systems, but the real fundamentals. You may even need to dial the bass
control down depending on the room acoustics.
The midrange frequencies
that define the pitch, rhythm and nuance of bass notes need to be spread around
to every listener.
That can't be done
with a 10" or larger driver alone or coupled with a tweeter. The OM12 has
midrange driver that is carefully matched to the woofer to produce flat response
and wide dispersion.
Selecting the right speaker
is important. The
OM12 divides the workload between the woofer and midrange with a high power-handling
two-pole crossover, the quality of which is unprecedented in a musical instrument
speaker system.
The result is breathtaking
clarity in every corner of the room. Your audience will finally hear the punch
and melody in every note you play.
| Specifications
- ONYX
OM-12 Speaker Cabinet |
| Model
|
OM12 |
| Impedance |
4 Ohm |
| Power
Handling |
Continuous
rms input: 250 Watts |
| Music
program input |
500 Watts |
| Input
Connectors |
One Speakon
and one ¼" phone connector |
| Crossover
|
Low resistance 2 pole crossover for each driver at 350Hz |
| Woofer
|
Light weight
neodymium 12" driver, made in USA |
| Midrange
|
Low distortion 6" midrange, made in USA |
| Cabinet
|
Light weight
construction covered with tough burgundy Idexhaut |
| Dimensions
|
23 ½ x 16 ½ x 13 ¾ (H x W x D) |
| Weight
|
33 lbs |
| Sensitivity
|
95
db, 1 Watt @ 1 meter |
|